HEWLETT-PACKARD CO BOISE DIV -- C3903A HP LASER JET TONER CARTRIDGE -- 7045-01-422-9592
===================== Product Identification =====================
Product ID:C3903A HP LASER JET TONER CARTRIDGE
MSDS Date:01/21/1995
FSC:7045
NIIN:01-422-9592
=== Responsible Party ===
Company Name:HEWLETT-PACKARD CO BOISE DIV
Address:11311 CHINDEN BLVD
City:BOISE
State:ID
ZIP:83714-5000
Country:US
Info Phone Num:208-323-6000
Emergency Phone Num:208-396-6000
CAGE:18660
=== Contractor Identification ===
Company Name:HEWLETT-PACKARD CO BOISE DIV
Address:11311 CHINDEN BLVD
Box:City:BOISE
State:ID
ZIP:83714
Country:US
Phone:208-396-6000
CAGE:18660
============= Composition/Information on Ingredients =============
Ingred Name:STYRENE ACRYLIC COPOLYMER
Fraction by Wt: 45-55%
Ingred Name:IRON OXIDE, MAGNETITE *96-2*
CAS:1317-61-9
Fraction by Wt: 45-55%
===================== Hazards Identification =====================
LD50 LC50 Mixture:ORAL LD50(RATS): >5000 MG/CUM
Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:INHALATION: MINIMAL RESPIRATORY TRACT
IRRITATION MAY OCCUR AS W/EXPOSURE TO LARGE AMOUNTS OF ANY
NON-TOXIC DUST. EYES: IRRITATION.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:IRRITATION
======================= First Aid Measures =======================
First Aid:INGESTION; DILUTE STOMACH CONTENTS W/SEVERAL GLASSES OF
WATER. INHALATION: REMOVE TO FRESH AIR. EYES: FLUSH W/RUNNING WATER
FOR 15 MINS. SKIN: WASH W/SOAP & WATER. OBTAIN MEDICAL ATTENTION
IN ALL CAS ES.
===================== Fire Fighting Measures =====================
Extinguishing Media:CO2, WATER, DRY CHEMICALS
Fire Fighting Procedures:NONE
Unusual Fire/Explosion Hazard:TONER MATERIAL, LIKE MOST ORGANIC
MATERIAL IN POWDER FORM, IS CAPABLE OF CREATING A DUST EXPLOSION.
================== Accidental Release Measures ==================
Spill Release Procedures:AVOID INHALATION OF THE DUST. SWEEP MATERIAL
ONTO PAPER & CAREFULLY TRANSFER TO A SEALABLE WASTE CONTAINER.
====================== Handling and Storage ======================
Handling and Storage Precautions:KEEP AWAY FROM CONTACT W/OXIDIZING
MATERIALS. KEEP OUT OF REACH OF CHILDREN.
============= Exposure Controls/Personal Protection =============
Respiratory Protection:NOT REQUIRED UNDER INTENDED USE. GOOD GENERAL
VENTILATION SHOULD BE SUFFICIENT UNDER INTENDED USE.
Ventilation:GOOD GENERAL VENTILATION
Protective Gloves:NOT REQUIRED UNDER NORMAL USE.
Eye Protection:NOT REQUIRED UNDER NORMAL USE.
Other Protective Equipment:NOT REQUIRED UNDER INTENDED USE.
Supplemental Safety and Health
PRODUCT IS AN ASSEMBLY FOR LASER BEAM PRINTER, COMPOSED OF A
PHOTOSENSITIVE DRUM, TONER POWDER, A DEVELOPER UNIT, A
CHARGER-ROLLER & A CLEANER BOTTLE. THE TONER POWDER CAN'T BE
REMOVE, UNTIL THE CARTR IDGE IS FORECED TO BE BROKEN.
================== Physical/Chemical Properties ==================
Melt/Freeze Pt:M.P/F.P Text:212-302F
Spec Gravity:1.4-1.8
Solubility in Water:NEGLIGIBLE
Appearance and Odor:BLACK FINE POWDER W/SLIGHT PLASTIC ODOR
================= Stability and Reactivity Data =================
Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZERS
Hazardous Decomposition Products:BY COMBUSTION: CO2, CO
==================== Disposal Considerations ====================
Waste Disposal Methods:WASTE CONTAINER COULD BE CONSIDERED AS PLASTIC
WASTE. DISPOSE OF IN ACCORDANCE W/LOCAL, STATE & FEDERAL
REGULATIONS.
======================================================================
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.